Laboratory eye wash stations Operating Instructions

Laboratory eye wash stations are essential safety equipment used to flush the eyes in case of chemical splashes or other eye injuries. They are specifically designed to provide a quick and immediate response to protect the eyes from harmful substances.

The laboratory eye wash station typically consists of a sink-like basin with a water spray nozzle or dual spray nozzles. The water flow is activated by a foot pedal or a hand-operated valve. Some advanced models may also include an automatic sensor for hands-free operation.

When using a laboratory eye wash station, it is important to follow these guidelines:

1. In case of a chemical splash or eye injury, immediately activate the eye wash station by stepping on the foot pedal or operating the hand valve.
2. Lean over the basin and position your eyes directly under the water spray nozzles. Keep your eyes open and allow the water to flush out any contaminants for at least 15 minutes.
3. Use your hands to hold your eyelids open, ensuring that the water reaches all areas of the eyes, including the corners.
4. If there are two spray nozzles, position your head between them to simultaneously flush both eyes.
5. Do not rub your eyes during the flushing process, as it can lead to further irritation or injury.
6. Seek medical attention after using the eye wash station, even if the symptoms seem to have improved. Some chemicals can cause delayed effects, and it is important to receive appropriate medical evaluation and treatment.
7. Regularly inspect and maintain the laboratory eye wash station to ensure its functionality. Replace water cartridges, clean nozzles, and check water pressure regularly as per manufacturer instructions.

Remember, laboratory eye wash stations are crucial for eye safety in a laboratory setting. Familiarize yourself with their location and operation before starting any experiments involving hazardous materials.